Beschrijving
- Clever inclusive mounting technology
- Glossy objects can be detected
- Minimal installation space
- Simple installation
- Switching distance adjuster
A reflector must be used in combination with these sensors. They can be installed in all kinds of industrial environments thanks to ample functional reserve. Even reflective objects can be reliably recognized through the use of polarized light.
Optical Data
Range | 5000 mm |
Reference Reflector/Reflex Foil | RQ100BA |
Switching Hysteresis | < 15 % |
Light Source | Red Light |
Polarization Filter | yes |
Service Life (T = +25 °C) | 100000 h |
Max. Ambient Light | 10000 Lux |
Opening Angle | 5 ° |
Light Spot Diameter | see Table 1 |
Two-Lens Optic | yes |
Electrical Data
Supply Voltage | 10…30 V DC |
Current Consumption (Ub = 24 V) | < 20 mA |
Switching Frequency | 700 Hz |
Response Time | 714 µs |
Temperature Drift | < 10 % |
Temperature Range | -25…60 °C |
Switching Output Voltage Drop | < 2,5 V |
PNP Switching Output/Switching Current | 200 mA |
Residual Current Switching Output | < 50 µA |
Short Circuit Protection | yes |
Reverse Polarity Protection | yes |
Overload Protection | yes |
Protection Class | III |
Mechanical Data
Adjustment | Potentiometer |
Housing Material | Plastic |
Degree of Protection | IP67 |
Connection | M12 × 1; 4-pin |
General Data
Scope of delivery | Mounting Console |
Output
PNP NO/NC antivalent | yes |