Beschrijving
- Fully encapsulated
- Integrated logic
- Scaled switching distance adjuster
These sensors have been specially designed for use in accumulation roller conveyors. Their compact design allows for installation between rollers below the transport level. They are thus protected against mechanical damage.
Optical Data
| Range | 550 mm |
| Potentiometer min | 220…270 mm |
| Potentiometer center | 320…400 mm |
| Potentiometer max | 550…630 mm |
| Switching Hysteresis | < 15 % |
| Light Source | Infrared Light |
| Wave Length | 880 nm |
| Service Life (T = +25 °C) | 100000 h |
| Risk Group (EN 62471) | 1 |
| Max. Ambient Light | 10000 Lux |
| Opening Angle | 5 ° |
Electrical Data
| Supply Voltage | 18…30 V DC |
| Current Consumption Sensor (Ub = 24 V) | < 30 mA |
| Switching Frequency | 100 Hz |
| Response Time | 5 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -15…50 °C |
| Switching Outputs | 1 |
| Switching Output Voltage Drop | < 0,8 V |
| PNP Switching Output/Switching Current | 200 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Logic | yes |
| Single Discharge | yes |
| Block Discharge | yes |
| Pneumatic Solenoid Valve Unit | yes |
| Protection Class | III |
Mechanical Data
| Adjustment | Potentiometer |
| Housing Material | Plastic |
| Full Encapsulation | yes |
| Degree of Protection | IP65 |
| Connection | M12 × 1; 4-pin |
| Cable Length | 88 cm |
Pneumatic Solenoid Valve Unit
| Valve no. | K04 |
| Supply Voltage Valve | 19,2…28,8 V |
| Current Consumption Valve | 86 mA |
| Operating Pressure | 4…7 bar |
| Nominal Width | 0,8 mm |
| Nominal flow rate 1 -> 2 | 20 NL/min |
| Nominal flow rate 2 -> 3 | 100 NL/min |
| Supply line connector pipe | 2× 8×1 |
| Working line connector pipe | 4×1 |
| Valve function | 3/2-Way |
| Switching function | NC |
Output
| PNP NC | yes |
