Beschrijving
- 360° visible, two-color job display
- Error prevention during partial picking processes in shelves and storage locations
- Low mounting thanks to integrated reflector
- Rugged aluminium housing
Pick to light light curtains use the single-lens reflex principle. The necessary reflector is pre-installed on the rear of the housing and serves as a reflective surface for the neighboring light curtain, making installation easier. The integrated two-color light from the job display is visible from 360° and shows both correct and incorrect picks.
Optical Data
Range | 2000 mm |
Min. Distance to Reflector | 100 mm |
Measurement Field Height (MFH) | 270 mm |
Beam Distance | 30 mm |
Switching Hysteresis | < 15 % |
Light Source | Red Light |
Polarization Filter | yes |
Service Life (T = +25 °C) | 100000 h |
Max. Ambient Light | 10000 Lux |
Opening Angle | 2,5 ° |
Two-Lens Optic | yes |
Electrical Data
Supply Voltage | 10…30 V DC |
Current Consumption (Ub = 24 V) | < 50 mA |
Switching Frequency | 60 Hz |
Response Time | 8 ms |
Temperature Drift | < 10 % |
Temperature Range | -25…60 °C |
Switching Output Voltage Drop | < 2,5 V |
PNP Switching Output/Switching Current | 200 mA |
Residual Current Switching Output | < 50 µA |
Short Circuit Protection | yes |
Reverse Polarity Protection | yes |
Overload Protection | yes |
Protection Class | III |
Mechanical Data
Adjustment | Teach-In |
Housing Material | Aluminum |
Degree of Protection | IP65 |
Connection | M12 × 1; 4-pin |
Cable Length | 250 mm |
Housing Length (L) | 396 mm |
Reflector Length (RL) | 324 mm |
Output
PNP NO/NC switchable | yes |