Beschrijving
- Basic module
- Menu-driven settings
- Modular system: 12 add-on modules can be connected
- Recognition of transparent objects
- Reflex and barrier operation mode are possible
Three wenglor fiber optic cables are connected to these sensors. Up to 12 add-on modules can be connected to this basic module, making 15 fiber optic cables available.
The graphic display guarantees easy, menu-driven sensor setup. Signal strengths and the switching threshold can be read from the display as numeric values or as a bar graph. Convenient programming and quick diagnosis is possible via the IO-Link interface.
The graphic display guarantees easy, menu-driven sensor setup. Signal strengths and the switching threshold can be read from the display as numeric values or as a bar graph. Convenient programming and quick diagnosis is possible via the IO-Link interface.
Optical Data
Switching Hysteresis | < 15 % |
Light Source | Red Light |
Wave Length | 660 nm |
Service Life (T = +25 °C) | 100000 h |
Max. Ambient Light | 10000 Lux |
Electrical Data
Supply Voltage | 18…30 V DC |
Current Consumption (Ub = 24 V) | < 70 mA |
Switching Frequency | 2 kHz |
Response Time | 250 µs |
On-/Off-Delay | 0…10000 ms |
Temperature Drift | < 10 % |
Temperature Range | -25…60 °C |
Switching Output Voltage Drop | < 2,5 V |
Switching Output/Switching Current | 100 mA |
Short Circuit Protection | yes |
Reverse Polarity Protection | yes |
Overload Protection | yes |
Teach Mode | NT, MT, ZT, DT, FT, HT, TP |
Interface | IO-Link |
IO-Link Version | 1.0 |
IO-Link Parameter | > 12 |
Protection Class | III |
Mechanical Data
Adjustment | Teach-In |
Housing Material | Plastic |
Degree of Protection | IP50 |
Connection | M12 × 1; 4+8-pin |
DIN-Rail mounting | 35 mm |
General Data
Speed Measurement | X |
Sensors can be linked with logic operations | X |
Selectable menu language | X |
Password Protection | X |
Output
Contamination Output | yes |
Configurable as PNP/NPN/Push-Pull | yes |
NO/NC switchable | yes |
IO-Link | yes |