Beschrijving
- Image processing functions
- MultiCore technology
- Reading of printed and directly marked 1D and 2D codes
The smart camera weQube is based on the wenglor MultiCore technology and combines the function of the scanner and the vision sensors. Therefore, this product allows to capture all established 1D codes and various 2D code types. Autofocus, region of interest and tracking ensure reliable and stable image recording. The following image processing modules are available: Dimensional accuracy check, sorting procedures, presence control, object counting, position output, pixel counting, filter options, and statistics evaluation.
Optical Data
| Working Range | ≥ 20 mm |
| Resolution | 736 × 480 Pixel |
| Image Chip | monochrome |
| Light Source | White Light |
| Service Life (T = +25 °C) | 100000 h |
| Field of vision | see Table 1 |
| Frame Rate | 25 Hz |
Electrical Data
| Supply Voltage | 18…30 V DC |
| Current Consumption (Ub = 24 V) | < 200 mA |
| Response Time | 40 ms |
| Temperature Range | 0…40 °C |
| Inputs/Outputs | 6 |
| Switching Output Voltage Drop | < 2,5 V |
| Switching Output/Switching Current | 100 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Interface | RS-232/Ethernet |
| Protection Class | III |
Mechanical Data
| Adjustment | Ethernet |
| Housing Material | Aluminum |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 12-pin |
| Type of Connection Ethernet | M12 × 1; 8-pin |
General Data
| Web server | yes |
Function
| Presence Check | yes |
| Pixel Comparison | yes |
| Reference Image Comparison | yes |
| Tracking | yes |
| Object detection | yes |
| Dimensional accuracy check | yes |
| 1D code reading | yes |
| 2D code reading | yes |
Output
| Configurable as PNP/NPN/Push-Pull | yes |
| NO/NC switchable | yes |
| Illumination Output | yes |
| RS-232 Interface | yes |
| Ethernet | yes |
| PROFINET | yes |
